ACUGARD Complete Swing Door Sensing System for swing doors employs two focused infrared sensors mounted on each side of the door to detect approaching, moving or stationary objects in the swing path. ACUGARD sensors, when utilized with a U Series microprocessor, systematically adjust, starting from the pivot end, as walls or guide rails overlap the sensing area providing continuous presence sensing throughout the door cycle. An Acumotion A sensor, included with the system, is mounted on the approach side header for activation.
Features
Focused active infrared pattern detects moving or stationary objects. Sensors remain at full strength at all times
Mounted on the top rail of the door panel, out of reach of shopping carts and hospital beds which typically impact doors
Adjustable pattern depth optimizes sensing area
Acumotion A sensor on approach side header provides activation
Optional Acusensor 1B can provide additional threshold protection
When used with the advanced “U” Series microprocessor, as the door opens, sensors starting from the pivot end systematically adjust as walls or guide rails overlap the sensing area (automated adjustment function) for continuous presence sensing throughout the door cycle
Four delay settings allow installers to adjust for the varying requirements on the swing side and approach side of door
Output relay-semi-conductor type (N/O & N/C selectable by dipswitch)
Compatible with both 12-24 VDC and 24 VAC power sources allowing seamless interface with all GyroTech equipment and the equipment of other manufacturers
Improved detection area for superior performance ACUGARD complete sensing system will function on all older non-microprocessor based controls, allowing upgrades of existing systems to the new ANSI standard
